Category
Storage Devices
Controllers
3WARE
Serial ATA RAID
Buy Price GST Ex	Buy Price GST Inc
$1,130.91	$1,244.00
Stock	GST Rate
Call	10%
Description
3Ware 16 port PCI Express x 8 bus SATA II RAID 0,1,10,5,50,6 and JBOD controller, 256MB cache, full height, Multilane to SATA connector, 4xCBL-SFF8087OCF-05M 0.5m multi-lane breakout cables included. 175.3 (L) x 116.1mm (H), multiple CAB-SFF8087-10M cables must be used for RM-312AB/41416AB/519AB chassis 3ware 9590SE-16ML * 16-port * Full height * 256MB onboard memory * Supported RAID levels: 0, 1, 5, 10, 50, Single Disk and JBOD * Multi-lane forward breakout cables included in kit
Detailed Description

3ware 9590SE Features

• 7th-generation StorSwitch� point-to-point, non-blocking switched architecture
• On-board PowerPC RISC processor provides true hardware RAID
  • SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives
• Bootable array support for greater fault tolerance
• Variable stripe size for performance tuning by application
• 64-bit LBA support
• ATA pass-through mode support
• 256 MB DDR2 400 memory with ECC protection
• 32 pooled DMA channels
• Complete configuration management suite
  • 3ware BIOS Manager 2 (3BM2) � easy to use BIOS configuration tool
  • 3ware Disk Manager 2 (3DM�2) � browser-based management tool
    • Features include: secure access via ssh or https, create unit, delete unit remove unit, import unit, migrate unit, verify unit rebuild unit
  • Command Line Interface (CLI) � scriptable configuration tool
• SNMP support
• SMTP support for email/pager notification
• ATA/6 and Out of band (OOB) staggered drive spin-up support
• Auto carving allows logical units larger than 2 TB to be divided into multiple units for legacy operating systems that are limited to a maximum of 2 TB per logical unit
• StorSave platform for advanced performance tuning with the BBU
• Multiple logical unit sizes and RAID levels on one card
• Multiple card support within a system for large storage requirements
• Hot-swap and hot-spare support for data availability
• Dynamic sector repair for robust data protection
• S.M.A.R.T. disk drive monitoring for reliability
• Emergency Flash Recovery protects against failed firmware upgrade
• Drive activity LED support
• Online Capacity Expansion and RAID Level Migration
• Battery Backup Unit (BBU) ready
• Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal
• Drive insertion and removal notification
• Array/Drive Status and drive identification LED support
• Chassis Control Unit for enclosure management via I2C
• Low operating temperature at full utilization