Award One Technology Pty Ltd
32/148 Chesterville Rd, Cheltenham, Victoria 3192, Australia
                         email [email protected]     ABN 63 367 898 792                                 
Home List by Product List by Vendor Product Search Ordering Warranty Login Register Lost Password Contact About
Part Number: ESA12E-G2121-25
Category
Storage Devices
 External RAID
  INFORTREND
   Infortrend EonStor DS iSCSI Host
Buy Price GST Ex Buy Price GST Inc
$3,115.45 $3,427.00
Stock GST Rate
Call 10%
Description
Infortrend iSCSI-to-SATA-II, 12 Bay, 2U Rackmount, RAID Subsystem Host (OS) Independant RAID Subsystem Single RAID Controller RAID Level 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID and JBOD 12 Hot Swappable SATA-II Drive Trays (no HDDs) 2 x 1 Gbps iSCSI Host Channels, 2 x RJ45 Connectors Redundant & Hot-Swappable Power Supply and Cooling Fans 1 x 10/100 Ethernet Port for Management and Monitoring 1 x RS232C Serial Port, Connector - Audio Jack Includes Rackmount Kit No Ethernet Cables supplied

* iSCSI Gigabit (Gb) Ethernet to SATA-II RAID subsystem
* Easy snap-in storage over standard Ethernet infrastructures
* Hardware XOR engine by dedicated ASIC266 chipsets
* Support for iSCSI initiators compliant with IETF iSCSI standard (RFC 3720)
* Microsoft Windows Server 2003 Virtual Disk Service (VDS) compatibility via
Infortrend hardware provider
* High-availability, modular enclosure design
* DDR Memory up to 2GB
Detailed Description
New Page 1

Specifications

RAID
  1. Supports all standard RAID functionality
  2. Supports RAID 0, 1 (0+1), 3, 5, 10, 30, 50, and NRAID
  3. Configurable stripe size and write policy per array
  4. Intelligent Drive Handling:
    1. In degraded mode: skips irreparable blocks to continue rebuild
    2. In normal operation: data-block verification and repair
Host Interface
  1. Two ( A12E-G2121-2) 1 Gbps Ethernet
  2. Concurrent I/O commands
  3. Tagged command queuing up to 256
  4. Adaptive cache write policies
Drive Interface
  1. Twelve (12) 3.0Gbps SATA-II (3Gbps) , hot-swappable drive trays
  2. Accommodates 1-inch pitch, 3.5-inch SATA-II (3Gbps) or SATA-I disk drives
  3. SATA-to-PATA dongle kit available to accommodate PATA drives
  4. Automatic bad-sector reassignment
  5. Dedicated bandwidth to each connected drive
System Components
  1. One (1) enhanced 2U enclosure
  2. One (1) RAID and I/O management module
  3. One (1) 256MB DDR RAM DIMM module (pre-installed on the controller module)
  4. Two (2), hot-swappable, redundant, 350W power supply units
  5. Three (3), hot-swappable, redundant, cooling modules running in high/low speeds
  6. Twelve (12), hot-swappable drive trays
  7. Two (2) front handles
  8. Optional battery backup unit (BBU)
Management
  1. One (1) RS-232C serial port for local access to firmware-embedded utility
  2. GUI, Telnet, and SSH system monitoring via Ethernet
  3. RAIDWatch manager software for Windows and Linux platforms
  4. Firmware-embedded manager via RS-232C (audio jack) that is platform independent
  5. Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, MSN, and ICQ
  6. Module status LED indicators:
    1. Two (2) per drive tray
    2. Nine (9) or per controller module
    3. One (1) per power supply unit
    4. One (1) per BBU module
    5. One (1) per cooling module
  7. Module failure alert through I 2 C bus
Interfaces
  1. Two (2) RJ-45 ports for Cat5e copper Ethernet networks
  2. One (1) COM port (38400, n, 8, 1)
Power Supply Module

Two (2) redundant hot-swappable power supplies with PFC

Input 100VAC at 6A, 240VAC at 3A with PFC (auto-switching)
47 to 63Hz
Output (Maximum output: 350 Watts)
+12.0V 25A max.
+ 5.0V 25A max.
+ 3.3V 20A max.
Cooling Module

Three (3) redundant dual-fan cooling modules

Maximum air flow High speed: 31.78 DFM
Low speed: 20.13 CFM
Environmental Specifications
Operating temperature 5° to 40°C
Non-operating temperature - 40º to 60ºC
Relative humidity: 5~95%, non-condensing
Operating altitude Operating: 0~12,000 ft
Dimensions
  1. Chassis without handles: 446(W) x 88(H) x 490(D) mm
  2. Chassis with handles: 482(W) x 88(H) x 505(D) mm
  3. Package: 344H x 600W x 670D mm
System Weight
  1. Net weight: 23.5kg
  2. Gross weight: 25.0kg (without drives)

 

Warranty Details
Warranty Period : 3 Years
* Stock amount is quantity held by Award One Technology and its suppliers