|
The SATDOCK2REU3 USB 3.0 Standalone Duplicator
and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs
through SuperSpeed USB 3.0, with the ability to swap drives in and out
as needed. The dock also functions as a standalone drive duplicator and
eraser � an efficient and versatile solution for external drive
management.
Featuring standalone Sector by Sector hard drive
duplication with built-in LED progress bar, and support for 2 drive
single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one
solution for any application requiring hard drive duplication or
erasing.
With support for SATA I/II/III, and large
capacity drives (tested up to 4TB) this HDD/SSD docking station is
compatible with virtually any SATA hard drive, and greatly increases the
storage/backup capabilities of your computer.
Extend the value of this hard drive docking
station further with the addition of our SATA to IDE Hard Drive
Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE
hard drive into a SATA hard drive dock.
The SATDOCK2REU3 is backed
by a 2-year StarTech.com warranty and free lifetime technical support.
|
Indicators |
| LED Indicators |
HDD1 / 75% |
|
HDD2 / 100% |
|
Link / 25% |
|
Power / 50% |
|
Packaging Information |
| Shipping (Package) Weight |
710 g [25.1 oz] |
|
Performance |
| Duplication Modes |
Sector by Sector (Whole
Drive) |
| Duplication Speed |
11GBpm |
|
Hardware |
| Number of Drives |
2 |
| Interface |
USB 3.0 |
| Fan(s) |
No |
| Drive Size |
2.5in & 3.5in |
| Drive Installation |
Removable |
| Compatible Drive Types |
SATA |
| Chipset ID |
Prolific - PL2775 |
|
Environmental |
| Storage Temperature |
-10�C to 95�C (14�F to
203�F) |
| Operating Temperature |
0�C to 85�C (32�F to 185�F)
|
| Humidity |
5-90% |
|
Connector(s) |
| Host Connectors |
USB Type-B (9 pin) USB 3.0
|
| Drive Connectors |
SATA Data & Power Combo
(7+15 pin) |
|
Performance |
| Erase Modes |
1-Pass Overwrite (NIST SP
800-88 Rev 1 - Clear) |
|
Power |
| Output Voltage |
12 DC |
| Plug Type |
M |
| Power Consumption (In
Watts) |
36 |
| Power Source |
AC Adapter Included |
|
Software |
| OS Compatibility |
OS independent; No software
or drivers required |
|
Special Notes / Requirements |
| Note |
Destination drive must be
the same size or larger than the source drive |
|
What's in the Box |
| Included in Package |
HDD Dock |
|
Universal power adapter:
comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes
ready for Australia and New Zealand only when you buy in
Australia and New Zealand |
|
USB 3.0 Cable |
|
User Manual |
|
Performance |
| Max Drive Capacity |
Currently tested with up to
4TB 7200 RPM 3.5" hard drives and 1TB 7200 RPM 2.5" hard drives
|
| Maximum Data Transfer Rate |
3Gbps |
| Type and Rate |
SATA II (3 Gbps) |
|
USB 3.0 - 5 Gbit/s |
|
Physical Characteristics |
| Product Height |
62 mm [2.4 in] |
| Product Length |
128 mm [5 in] |
| Product Weight |
610 g [21.5 oz] |
| Product Width |
103 mm [4.1 in] |
|
Power |
| Center Tip Polarity |
Positive |
| Input Current |
1.2A |
| Input Voltage |
110V-240V AC |
| Output Current |
3000mA |
|
Award One Technology
Pty Ltd
